**This is the blog post that led to Myna. Sign up now and help us beta test the world’s fastest A/B testing product!**

Were I a betting man, I would wager this: the supermarket nearest to you is laid out with fresh fruit and vegetables near the entrance, and dairy and bread towards the back of the shop. I’m quite certain I’d win this bet enough times to make it worthwhile. This layout is, of course, no accident. By placing essentials in the corners, the store forces shoppers to traverse the entire floor to get their weekly shop. This increases the chance of an impulse purchase and hence the store’s revenue.

I don’t know who developed this layout, but at some point someone must have tested it and it obviously worked. The same idea applies online, where it is incredibly easy to change the “layout” of a store. Where the supermarket might shuffle around displays or change the lighting, the online retailer might change the navigational structure or wording of their landing page. I call this process *content optimisation*.

Any prospective change should be tested to ensure it has a positive effect on revenue (or some other measure, such as clickthroughs). The industry standard method for doing this is A/B testing. However, it is well known in the academic community that *A/B testing is significantly suboptimal*. In this post I’m going to explain why, and how you can do better.

There are several problems with A/B testing:

- A/B testing is suboptimal. It simply doesn’t increase revenue as much as better methods.
- A/B testing is inflexible. You can’t, for example, add a new choice to an already running test.
- A/B testing has a tedious workflow. To do it correctly, you have to make lots of seemingly arbitrary choices (p-value, experiment size) to run an experiment.

The methods I’m going to describe, which are known as bandit algorithms, solve all these problems. But first, let’s look at the problems of A/B testing in more detail.

## Suboptimal Performance

Explaining the suboptimal performance of A/B testing is tricky without getting into a bit of statistics. Instead of doing that, I’m going to describe the essence of the problem in a (hopefully) intuitive way. Let’s start by outlining the basic A/B testing scenario, so there is no confusion. In the simplest situation are two choices, A and B, under test. Normally one of them is already running on the site (let’s call that one A), and the other (B) is what we’re considering replacing A with. We run an experiment and then look for a significant difference, where I mean significance in the statistical sense. If B is significantly better we replace A with B, otherwise we keep A on the site.

The key problem with A/B testing is it doesn’t respect what the significance test is actually saying. When a test shows B is significantly better than A, it is right to throw out A. However, when there is no significant difference the test is *not* saying that B is no better than A, but rather that the data does not support any conclusion. A might be better than B, B might be better than A, or they might be the same. We just can’t tell with the data that is available*. It might seem we could just run the test until a significant result appears, but that runs into the problem of repeated significance testing errors. Oh dear! Whatever we do, if we stick exclusively with A/B testing we’re going to make mistakes, and probably more than we realise.

A/B testing is also suboptimal in another way — it doesn’t take advantage of information gained during the trial. Every time you display a choice you get information, such as a click, a purchase, or an indifferent user leaving your site. This information is really valuable, and you could make use of it in your test, but A/B testing simply discards it. There are good statistical reasons to not use information gained during a trial within the A/B testing framework, but if we step outside that framework we can.

* Technically, the reason for this is that the probability of a type II error increases as the probability of a type I error decreases. We control the probability of a type I error with the p-value, and this is typically set low. So if we drop option B when the test is not significant we have a high probability of making a type II error.

## Inflexible

The A/B testing setup is very rigid. You can’t add new choices to the test, so you can’t, say, test the best news item to display on the front page of a site. You can’t dynamically adjust what you display based on information you have about the user — say, what they purchased last time they visited. You also can’t easily test more than two choices.

## Workflow

To setup an A/B experiment you need to choose the significance level and the number of trials. These choices are often arbitrary, but they can have a major impact on results. You then need to monitor the experiment and, when it concludes, implement the results. There are a lot of manual steps in this workflow.

## Make out like a Bandit

Algorithms for solving the so-called bandit problem address all the problems with A/B testing. To summarise, they give optimal results (to within constant factors), they are very flexible, and they have a fire-and-forget workflow.

So, what is the bandit problem? You have a set of choices you can make. On the web these could be different images to display, or different wordings for a button, and so on. Each time you make a choice you get a reward. For example, you might get a reward of 1 if a button is clicked, and reward of 0 otherwise. Your goal is to maximise your total reward over time. This clearly fits the content optimisation problem.

The bandit problem has been studied for over 50 years, but only in the last ten years have practical algorithms been developed. We studied one such paper in UU. The particular details of the algorithm we studied are not important (if you are interested, read the paper – it’s very simple); here I want to focus on the general principles of bandit algorithms.

The first point is that the bandit problem explicitly includes the idea that we make use of information as it arrives. This leads to what is called the exploration-exploitation dilemma: do we try many different choices to gain a better estimate of their reward (exploration) or try the choices that have worked well in the past (exploitation)?

The performance of an algorithm is typically measured by its regret, which is the average difference between its actual performance and the best possible performance. It has been shown that the best possible regret increases logarithmically with the number of choices made, and *modern bandit algorithms are optimal* (see the UU paper, for instance).

Bandit algorithms are very flexible. They can deal with as many choices as necessary. Variants of the basic algorithms can handle addition and removal of choices, selection of the best *k* choices, and exploitation of information known about the visitor.

Bandits are also simple to use. Many of the algorithms have no parameters to set, and unlike A/B testing there is no need to monitor them — they will continue working indefinitely.

Finally, we know bandits work on the web, as much of the current research on them is coming out of Google, Microsoft, Yahoo!, and other big Internet companies.

So there you have it. Stop wasting time on A/B testing and make out like a bandit!

## Join Our Merry Band

Finally, you probably won’t be surprised to hear we are developing a content optimisation system based on bandit algorithms. I am giving a talk on this at the Multipack Show and Tell in Birmingham this Saturday.

We are currently building a prototype, and are looking for people to help us evaluate it. If you want more information, or would like to get involved, get in touch and we’ll let you know when we’re ready to go.

**Update: In case you missed it at the top, Myna is our content optimisation system based on bandit algorithms and we’re accepting beta users right now!**